Operation Procedure - Hitachi C42 Instruction Manual

3.

Operation Procedure

1) Confirm that the probe and the magnetic sensor attachment are
cleaned, disinfected or sterilized.
2) Connect the probe to the ultrasound diagnostic scanner, operate
the scanner, and adjust the image, all according to the
instructions given in the operation manual for the ultrasound
diagnostic scanner with which the probe is used as connected.
3) Confirm the direction of the probe. The relationship between the
direction of the probe and image is shown in Fig. 2.
The Right-left orientation mark on the image indicates the
direction of the index mark of the probe.
Fig. 2 Relationship between the directions of the probe
and the Right-left orientation mark
Index mark
Right-left orientation mark
-6- Q1E-EP1359