Trouble-Shooting - Panasonic NI -FS750 Operating Instructions Manual

Trouble-shooting

Problem
The power plug has not been plugged in.
The power switch is "
No heating
The power indicator light is flashing.
The product is abnormal.
The automatic heating function is turned off
(lights up in green).
The steam button is not pressed down.
There is no water in the water tank.
No steam
Bubbles accumulate in the main body.
The power switch is turned off during ironing.
16
Causes Solution
Insert the power plug.
Turn on the iron with the power switch
OFF(台灣:關) ".
" ON(台灣:開) ".
Before using (the indicator is flashing →
the indicator is on), wait for about 24
seconds.
Have your product repaired by the specified
service agent.
Turn off the power switch and turn it
on again.
Press down the steam
Use the cup to add water to the
" MAX(台灣:滿水) " position on the tank
window.
Hold the main body and keep it vertical.
Keep the steam button pressed down.
Before using (the indicator is flashing →
the indicator is on), wait for about 24
seconds.
Trouble-shooting
Problem
The steam is
insufficient
There is a noise or
a sense of vibration
button. during operation
Noise will be heard
when the product is
shaken
The tripled powerful
steam indicator does
not light up
The tripled powerful
steam does not
continue to eject
Causes
Pour the remaining water in the water tank
Other types of water except distilled water or out. And use the cup to add distilled water
pure water are added in the tank. or pure water to the tank " MAX(台灣:滿水)"
mark.
The steam vents are blocked up with dirt Have your product repaired by the specified
or scale. service agent.
If the temperature controller in the main body is activated, the steam volume may decrease for a
while. The steam volume will get back to normal once the temperature is stable. The steam will
be invisible occasionally, depending on the ambient temperature and indoor brightness.
This is the noise of temperature controller during operation, which is normal.
This is the sound or vibration caused by water pumping in the tank. It's normal.
This sound comes from the pipe hitting the tank. It's normal.
The steam button is not pressed and held for Press and hold the steam button for about
10 seconds. 10 seconds.
Use the cup to add water to the
No or little water is left in the water tank. " MAX(台灣:滿水) " position on the tank
window.
The tripled powerful steam is a strong steam that is ejected instantaneously, not continuous steam.
Solution
17