D-Link DAP-1620 Manual page 23

Hide thumbs Also See for DAP-1620:

Step 2: Once confirmed the WPS/Wi-Fi light is blinking on your router, within one

minute press and hold the WPS button on the Range Extender for 2-3 seconds. The LED

should start to blink green. Once it makes connection with your router the LED will stop

flashing and turn solid GREEN. (This may take up to 3 minutes)

NOTE: If the range extender still does not turn green then please take a look at this FAQ

How do I setup my range extender using the QRS Mobile app?

2.  How do I enable Smart Mesh Roaming on my range extender?

1.  A:

2. NOTE: The following range extenders support Smart Mesh Roaming with the latest

firmware:

DAP-1325, DAP-1530, DAP-1610, DAP-1820, DAP-1755, DAP-1950, DAP-1955

How do I check what firmware version my extender has?

How do I upgrade the firmware on my range extender?

Requirement for Smart Mesh Roaming:

1. Your Range Extender's wireless network name and password must be the same as your

router.

2. Your connecting devices (Phone/laptop etc..) must support 802.11K/V standard