Cleaning - Silvercrest SSTB 10 C2 Operating Instructions And Safety Instructions

Fault
The Bluetooth
connection cannot be
established.
The remote control
does not work.
NOTE
► If you are unable to resolve the problem by applying any of the aforementi-
oned methods, please contact the Customer Service department.

Cleaning

DANGER
Risk of fatal injury from electrocution!
► Remove the mains adapter from the power socket before starting to clean
the device.
NOTICE
Damage to the device!
► To avoid irreparable damage to the device, ensure that no moisture gets
into it during cleaning.
► Do not use caustic, abrasive or solvent-based cleaning materials.
These can damage the surfaces of the device.
♦ Clean the surfaces of the device with a soft, dry cloth. For stubborn dirt, use a
slightly damp cloth with a mild detergent.
SSTB 10 C2
Possible cause
®
The device is not visible
in the Bluetooth
menu.
The remote control is
pointing the wrong way.
The distance between
the remote control and
the device is too great.
The batteries in the
remote control are empty.
Remedy
Disconnect the currently connected
playback device.
Press the
conds to stop the current Bluetooth
®
connection. The device is now ready to
be paired with another Bluetooth
device.
Point the remote control towards the
infrared sensor
device.
Move the remote control closer to
the device.
Replace the batteries.
/ PAIR button for 2 se-
on the front of the
GB │ IE │ 35
®
®
■