Background Operations; Clock; Vibrator; Time-Out Timer (Tot) - JVC Kenwood ТК-5220 Instruction Manual

BACKGROUND OPERATIONS

Your dealer can activate a variety of transceiver functions to
perform without any additional operation on your part.

CLOCK

If activated by your dealer, you can view the clock by pressing
the key programmed as Clock.
Note: Removing or leaving the battery pack uncharged for
extended periods will clear the clock time.
To set the clock:
1 Press the key programmed as Clock Adjustment.
• The current time setting appears.
2 Press
3 Press
4 Repeat steps 2 and 3 to set the month, day, hour, and minute.
5 Press
• You can press

VIBRATOR

When an optional vibrator is installed, the vibrator function will
alert you when an optional signaling call is received. Press the
key programmed as Vibrator, or access the Menu {page 12},
to turn the Vibrator function ON and OFF.

TIME-OUT TIMER (TOT)

The Time-out Timer is used to prevent you from using a
channel for an extended duration. If you continuously transmit
for a preset time, the transceiver will stop transmitting and an
alert tone will sound. Release the PTT switch.
/ to increase or decrease the year setting.
to set the year and cycle to the month setting.
to exit Clock Adjustment mode.
at any time to exit Clock Adjustment mode.
25