Table of Contents
Advertisement
Connecting devices
6.
Plug the small plug end of the DC power lead
into the socket on the side of the cradle.
7.
Plug the other end into your vehicle's 12V
(cigarette lighter) socket.
8.
To adjust the angle of front panel, slacken the
adjustable knobs on the cradle and then turn it
gently. In addition to tilting the cradle up and
down and from side to side, you can also rotate
front panel in the cradle, from left, -45-45°.
9.
When you happy, tighten up the knobs again.
• This navigation player and its automotive adapter
are designed for use in vehicles that have 10.5-16V,
negative ground electrical systems.
(This is standard for most vehicles.)
If your vehicle has a different type of electrical
system, the DC power system cannot be used.
• When attaching a navigation holder, remove
impurities in the area to attach before attaching, and
press suction button to avoid falling.
• Adjust the direction of holder to prevent it from
disturbing the driving.
• Adjust it to the angle you can see well.
• Be careful of falling the navigation from window
when you drive.
• When using the supporter, it can vibrate from the
vibration from itself. Attach the supporter close to
the dashboard as much as you can.
14
Advertisement
Table of Contents
