Sony DSC-F717 Operating Instructions (primary manual) Operating Instructions Manual page 107

When the mode dial is set to
Item Setting
SCN
x
ISO 800 / 400 / 200 / 100 / xAUTO
(IMAGE SIZE) x2560×1920 / 2560 (3:2) / 2048×1536 /
1280×960 / 640×480
(P.QUALITY) xFINE / STANDARD
MODE (REC MODE) TIFF
VOICE
E-MAIL
EXP BRKTG
BURST 3
xNORMAL
±
(FLASH LEVEL) HIGH
xNORMAL
LOW
PFX (P.EFFECT) SOLARIZE / SEPIA / NEG.ART /
xOFF
(SHARPNESS) +2 / +1 / x0 / –1 / –2
, S, A, M, or SCN
/
/ /
Description
Sets the Scene Selection mode (page 29). (This setting can be made only in SCN
mode.)
This selects the ISO sensitivity. Selecting a large number augments the brightness
when recording in dark locations. However, note that increasing the sensitivity may
make recorded images appear coarser. (This setting cannot be made in SCN mode.)
Selects the image size when shooting still images (page 19).
Selects the image quality (page 31).
– Records a TIFF (uncompressed) file in addition to the JPEG file (page 60).
– Records an audio file (with a still image) in addition to the JPEG file (page 61).
– Records a small-size (320×240) JPEG file in addition to the selected image size
(page 61).
– Records three images with the exposure value of each image slightly shifted
(page 53).
– Records three images in succession (page 59).
– Records an image using the normal recording mode.
– Makes the flash level higher than normal.
– Normal setting.
– Makes the flash level lower than normal.
Sets the image special effects (page 62).
Adjusts the sharpness of the image. The
setting is 0).
indicator appears (except when the
107