Toshiba KK-1600 Service Manual page 20

[C] STP bottom cover R
1. Remove stapler. (See Fig. 6-4 to 6-7)
2. Remove 4 screws and detach STP bottom cover
R.
[D] STP staple cover
1. Detach STP cover. (See Fig. 6-1 and 6-2)
2. Remove STP staple cartridge. (See Fig. 6-3)
3. Remove stapler. (See Fig. 6-4 to 6-7)
4. Detach STP bottom cover R. (See Fig. 6-9)
5. Remove one screw, release 5 hooks, and de-
tach STP staple cover.
[E] STP cover open switch
1. Detach STP cover. (See Fig. 6-1 and 6-2)
2. Remove STP staple cartridge. (See Fig. 6-3)
3. Remove stapler. (See Fig. 6-4 to 6-7)
4. Detach STP bottom cover. (See Fig. 6-9)
5. Detach STP staple cover. (See Fig. 6-10)
6. Detach one connector from STP controller PWA
(J2) and release 3 clamps.
7. Remove one screw and remove STP cover open
switch.
October 2000 © TOSHIBA TEC
STP bottom cover R
Screw
Hook
Clamp
Screw
6 - 3 KK-1600 DISASSEMBLY AND REPLACEMENT
Screw
Fig. 6-9
STP staple cover
Hook
Screw
Fig. 6-10
Clamp
Connector
Fig. 6-11
STP cover open switch
Fig. 6-12
319
321-2
321-3
321-4