Pkd-1 Software Security Dongle; Rework Jig; Rf Calibration Adapter - Nokia RH-77 Manual

Nokia Customer Care

PKD-1 Software Security Dongle

The PKD-1 is a hardware dongle that, when connected to the parallel (LPT) port of the
PC, enables the use of the service software. It is not possible to use the service software
without the dongle. Printers or other peripheral devices can be connected to the PC
through the dongle, if needed.
Caution: Make sure that you have switched off the PC and the printer before making
connections.
Caution: Do not connect the PKD-1 to the serial port. You may damage your PKD-1
and/or your PC.
RJ-32 Rework Jig
The RJ-32 serves as a holder for PWB component de-soldering and soldering.
SA-54 RF Calibration Adapter
The SA-54 adapter is used to replicate the mobile terminal's RF when calculating cable
path losses.
Issue 01 04/2005
©2005 Nokia Corporation
Company Confidential
2118 (RH-77)
Service Tools
Page 7