Troubleshooting - Silvercrest Z31246A Operation And Safety Notes

on the scale plate is noted, the scale switches automatically
into the time mode

Troubleshooting

= Fault
= Cause
= Solution
=
= The scale is unstable or not quite plumb.
= Ensure the device is firmly fixed in place and exactly plumb.
=
= The scale is overloaded. A signal tone is sounding.
= Remove the overload.
= Displays out2, then switches to the clock
display
= The scale was loaded with more than 2,500 g before you
switched into weighing mode.
= Remove the overload within 10 seconds. The display
returns to the weighing mode within five seconds.
=
= The batteries are nearly flat.
= Replace the batteries (see section "Replacing the batteries").
=
= The batteries are too weak to weigh. You cannot operate
the scale.
= Replace the batteries (see section "Replacing the batteries").
12 GB/IE
.
5
C
D
o
N
c
C
c
e
D
Cont
of ho
Fault
Direc
the d
Pb H