Wireless Lan Function - NEC Lavie PC-HA97GRAW User Manual

4.
Push the left and right ends of the memory slot.
5.
Remove the memory
6.
Attaching the memory slot cover
Installing the memory card
1.
Perform steps 1 to 3 of "Removing the memory" and remove the
memory slot cover.
2.
Align the notch of the memory card with the protrusion on the memory
slot.
Protrusion
3.
Insert the memory card all the way into the memory slot.
Cutout
4.
Press the memory card down strongly.
When the memory card is set down, this part
opens on the left and right, and returns to its
original position after the memory card is locked.
5.
Confirm that the memory card is locked in the slot.
6.
Attaching the memory slot cover.

8 Wireless LAN Function

The wireless LAN standard supported by this device is "IEEE802.11ax".
Wireless communication based on the Wi-Fi4 (IEEE802.11n), Wi-Fi5
(IEEE802.11ac), and Wi-Fi6 (IEEE802.11ax) standards has changed the bandwidth
of communication channels used from the conventional 20MHz to 40MHz, 80MHz
(Wi-Fi By expanding to (Wi-Fi5, Wi-Fi6 only), it supports functions that realize higher
communication speeds.
• In order to perform wireless communication using extended communication
bandwidth, the connected wireless LAN device must also support the extended
bandwidths.
• It is necessary to configure the security setting to WPA-Personal (AES), WPA2-
Personal, or WPA3-Personal when performing wireless communication
according to Wi-Fi4, Wi-Fi5, and Wi-Fi6 standards. If other security settings are
configured, Wi-Fi4, Wi-Fi5, Wi-Fi6 standards cannot be used.
13