Miele@Home - Miele PFD 101 Operating Instructions Manual

Miele@home

Your dishwasher is equipped with an
integrated WiFi module.
You can connect your dishwasher to
your WiFi network.
This will increase the energy
consumption, even when the
dishwasher is switched off.
The "Settings" and "Miele@home
settings" menus will be added as
additional menu options.
Make sure that your WiFi network
signal strength is strong enough at
the installation site of your
dishwasher.
There are a number of ways of
connecting your dishwasher to your
WiFi network:
Setting up Miele@home
You can connect your dishwasher to
your network using WPS or via the app.
Connect using WPS
You can connect your dishwasher to
your WiFi network using WPS (Wi-Fi
Protected Setup).
Your WiFi router must support WPS.
 Confirm the message
with OK.
button
 Activate the WPS function on your
router within 2 minutes.
 Once the connection has been
established, confirm the message
with OK.
If the connection fails, you have
probably not activated WPS on your
router quickly enough. Repeat the steps
above.
Settings 
Press WPS
95