Configure Connection 1 for DHCP for WAN
To configure the WAN connection for DHCP, perform the steps listed
below. Some of the settings do not need to be changed the first time the
device is set up, but can be changed later if you choose.
Click the
Connection 1
button to view
the
DHCP
Connection
Setup
menu
pictured.
Select DHCP
from the Type,
VPI:
and
VCI:
- if these
values are not
correct,
change these
according to
the instruction
of your ISP.
Click
the
Apply
button
after you have
entered the
account
information.
15