Table of Contents
Advertisement
Hardware installation
OC Station installation
1.
Insert the OC Station to the empty
5.25" drive bays.
2.
Secure the OC Station with four
screws.
Cable connection
1.
Connect one end of the supplied
data cable to the GP connector on
the OC Station.
2.
Connect the other end of the
supplied data cable to the GP
and USB1112/GP_OC_Station
connectors on the motherboard.
3.
Connect an ATX 4-pin power plug
from the system power supply to
the POWER connector.
4.
You may connect the extra fans
to the fan connectors on the OC
Station.
Using the OC Station
1.
After connecting the OC Station to the motherboard, press the Power button
After connecting the OC Station to the motherboard, press the Power button
to turn on the OC Station display.
2.
Rotate the Control knob to go to the
Rotate the Control knob to go to the
desired item, and then press OK to
enter its submenu.
3.
After selecting an item, rotate
After selecting an item, rotate
clockwise or counter-clockwise to
increase of decrease the value.
Press OK to apply settings or
4.
BACK to return to the previous
page and discard the changes.
4
2
3
4
1
2
2
1
ASUS OC Station
Advertisement
Table of Contents
