D-Link DSL-G604T Quick Installation Manual page 10

Configuring the Router (continued)
PPPoE/PPPoA Connections
If you selected the PPPoE/PPPoA connection type in the previous menu, you will see the
Setup Wizard menu pictured here. Type in the Username and Password used to identify
and verify your account to the ISP. The VPI number and VCI number should not be changed
unless you have been instructed to change them. Select the Connection Type used for
encapsulation specific to your service. Click Next when you are ready to continue to the
Setup Completed menu.
If you are not sure what Connection Type, VPI and VCI to use, please check with your ISP.
Type the
Username
and
Password
for your ISP
account.
Use the pull-down menu to choose
the correct Connection
user may choose between
VC-Mux, PPPoE LLC
LLC, as instructed by your ISP.
Type. The
PPPoA
or PPPoA
10
If you have been
told by your ISP to
change the
VCI number,
the new values.
Click the Next button. Skip ahe
the Setup Completed menu below.
VPI or
Type
ad to