Philips WACS7000 Quick Start Manual page 2

Connect/Setup
Set up connection between the Center and Station
The first time you set up a Wi-Fi connection, place
the Center and Station side by side on a flat and
firm surface
Connect WACS7000 to power supply - connect the Center
first followed by the Station
Center/Station:
• The screen lights up in a few seconds
Auto installation/connection starts
• Both the Center and Station are switched on
The HD screen appears if the Station is
connected to the Center
(it takes about 1.5 minutes)
Relocate the Center and Station as desired: plug and stream*
• Simply unplug the Center or Station and power them up in your
preferred rooms.
• You will be able to stream* the hard disk music between the
Center and Station
IMPORTANT!
• Avoid installing in between thick walls. Separating the Center and
Station by 2 or more walls may cause poor streaming connection.
• For better Wi-Fi reception, you can adjust the Wi-Fi antenna, or
adjust the location of the Center and Station (e.g. shorten the
distance between the Center and Station).
: indicates maximum reception;
• For wall mounting, please refer to the User Manual, Appendix:
How to mount your Center and Station onto walls.
You may need assistance from a qualified service personnel.
* Streaming is the process in which data (music in this case) is
transferred from one device to another device or many other
devices.
: indicates minimum reception
Center
AC
AC
Station