2/57
About this documentation
1.2 Purpose
This document instructs the technical staff of the machine manufacturer on how
to perform the mechanical and electrical installation safely and on how to
commission the device.
Required qualification: Individual who is able to assess the tasks assigned and
to identify possible safety risks owing to qualification in the subject, knowledge
and experience. The individual should also be familiar with the standards and
regulations.
1.3 Scope
This operating instruction applies to all industrial PCs and panel PCs whose
type code starts either with "PR4..." or "VR4...": The type code is located on the
type plate of the device, also refer to
page
3.
1.4 Further documents
Title
Rexroth IndraControl
VAP 01
Power Supply Unit
Rexroth IndraControl
PR and VR Devices
Software Applications
IndraControl
PR and VR Devices
Accessories
VAC 08.1
CDI+ splitter
Tab. 1-2: Required and supplementing documentation
1.5 Customer feedback
Customer requests, comments or suggestions for improvement are of great
importance to us. Please email your feedback on the documentations to
Feedback.Documentation@boschrexroth.de. Directly insert comments in the
electronic PDF document and send the PDF file to Bosch Rexroth.
Bosch Rexroth AG R911384699_Edition 03
IndraControl PR4 and VR4 Control cabi-
chapter 2.1 "Product identification" on
Part number and document type
R911339613
Operating Instructions
R911384733
Project Planning Manual
R911384727
Project Planning Manual
Operating Instructions
R911400465
net PC and panel PC