Advertisement
1 | Overview
This enclosure holds several Bosch and EDM input, output, and receiver modules.
2 | Installation
NOTICE!
Failure to follow the mounting instructions can damage the enclosure.
1. Open by inserting a screwdriver into the two slots.
2. Use the mounting holes when installing to an elecrical box.
1
UP
Callout
Description
1
4 in (10 cm) square
2
Single-gang box
NOTICE!
The wall tamper does not function when you install to an electrical box.
3. Install a 3-point module before installing the enclosure to the wall.
© 2019 Bosch Security Systems B.V, Torenallee 49 5617 BA Eindhoven, Netherlands
3
4
Callout
Description
3
Double-gang box
4
3.5 in (9 cm) octagon
8
4 2 1
+AUX-
TMPR R
B
G
Y
1
COM
OUTPUT
OPTION
Callout
Description
1
Three-point mounting slots
4. Attach to the surface. Refer to the following illustration.
UP
1
Callout
Description
1
Surface install holes
NOTICE!
Inserting a screw into the tamper bracket keeps the bracket and AE20 separate
when the screw is tightened, or when the AE20 is removed. For proper align-
ment, insert this screw last.
3 | Attaching
Install a module into the AE20. Refer to the following illustration.
1
2
3
COM
4
5
COM
6
7
COM
8
1
Callout
Description
2
Wall tamper screw location
F.01U.035.922 | 03 | 2019.05 | 2
Advertisement
