Getting Started; Maintenance / Cleaning - Silvercrest SUH 3.0 A1 User Manual And Service Information

SilverCrest SUH 3.0 A1
Please note that a maximum of three USB 3.0 devices may be connected at the
same time. When three USB 3.0 devices are connected simultaneously no
additional USB 2.0 device may be connected, as this will overload the mains
adapter.

Getting Started

 Plug the integrated mains adapter TYTE150500300EU into a wall outlet
and connect the other end of the power cord to the "DC 5V" inlet of the USB
hub (the labels of the ports are printed on the bottom of the USB hub).
 Insert the small plug of the supplied USB cable into the "USB IN" port of the
USB hub.
 Insert the large plug of the supplied USB cable into a USB port on your
computer.
 Your computer will detect the USB hub automatically (Microsoft Windows
XP or higher): it is now ready for use.
 You can now connect your USB devices to the "USB 1, USB 2, USB 3 and
USB 4" ports on the USB hub and use them.

Maintenance / Cleaning

Warning! The device does not contain any parts that require user maintenance
nor cleaning. Never open the housing of the device, to avoid any danger.
Make sure that the components do not become dirty. Do not use any solvents,
irritants or gaseous cleaners. Use only a slightly dampened, soft cloth for
cleaning.
If you notice any smoke, unusual noise or strange smells, switch off the device
immediately and pull the integrated mains adapter from the power supply.
Should this happen, the device must not be used further.
38 - English
®