Maintenance And Service - Bosch AL 1404 Operating Instructions Manual

Operating Instructions
With continuous or several repetitive charging cycles
without interruption, the charger can warm up. This is
not meaningful and does not indicate a technical defect
of the battery charger.
A battery that is new or that has not been used for a
longer period will not achieve its full capacity until after
approx. 5 charging and discharging cycles. Leave such
a battery in the battery charger until it has warmed up
considerably.
A significantly reduced working period after charging
indicates that the battery is used and must be replaced.
Troubleshooting – Causes and
Corrective Measures
Cause
No charging procedure possible
Battery contacts contami-
nated
Battery defective
Battery charge indicator 3 does not light up
Mains plug of battery
charger not plugged in
(properly)
Battery not inserted (prop-
erly)
Socket outlet, mains cable
or battery charger defec-
tive

Maintenance and Service

Maintenance and Cleaning
If the battery charger should fail despite the care taken
in manufacturing and testing procedures, repair should
be carried out by an authorised after-sales service
agent for Bosch power tools.
In all correspondence and spare parts orders, please
always include the 10-digit article number on the type
plate of the battery charger.
2 609 140 298 • 12.4.06
Corrective Measure
Clean the battery con-
tacts (e. g. by inserting
and removing the battery
several times) or replace
the battery
Replace the battery
Insert mains plug (fully)
into the socket outlet
Insert battery (fully) into
the battery charging com-
partment
Check the mains voltage;
have the battery charger
checked by an authorised
after-sales service agent
for Bosch power tools
WARNING! Important instructions for connecting
a new 3-pin plug to the 2-wire cable.
The wires in the cable are coloured according to the fol-
lowing code:
Do not connect the blue or brown wire to the earth ter-
minal of the plug.
Important: If for any reason the moulded plug is
removed from the cable of this power tool, it must be
disposed of safely.
Service and Customer Assistance
Exploded views and information on spare parts can be
found under:
www.bosch-pt.com
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
Middlesex UB 9 5HJ
✆ Service:. . . . . . . . . . . . . . . +44 (0) 18 95 / 83 87 82
✆ Advice line:. . . . . . . . . . . . +44 (0) 18 95 / 83 87 91
Fax: . . . . . . . . . . . . . . . . . . . . +44 (0) 18 95 / 83 87 89
Ireland
Beaver Distribution Ltd.
Greenhills Road
Tallaght-Dublin 24
✆ Service:. . . . . . . . . . . . . . . . .+353 (0)1 / 4 14 94 00
Fax: . . . . . . . . . . . . . . . . . . . . . .+353 (0)1 / 4 59 80 30
Australia and New Zealand
Robert Bosch Australia Pty. Ltd.
RBAU/SPT
1555 Centre Road
P.O. Box 66
3168 Clayton/Victoria
✆ . . . . . . . . . . . . . . . . . . . . . +61 (0)1 / 3 00 30 70 44
Fax: . . . . . . . . . . . . . . . . . . . . +61 (0)1 / 3 00 30 70 45
www.bosch.com.au
English–2