Format; Remove Hs; Reset - Silvercrest SGKT 50 A1 User Manual And Service Information

FORMAT

To set the clock format, proceed as follows:

Press the  or  buttons on the multifunction control [16] to select the "24 HOUR"
option for 24-hours clock display or select "12 HOUR" for 12-hours clock display.

Press the Menu/OK button [15] to confirm your selection.

A confirmation beep will sound and the "SAVED" message will appear for a few
seconds on the display [17].
To distinguish ante meridian (morning) and post meridian (afternoon) time for the 12-
hour display, "PM" [17] will display for post meridian clock hours.

REMOVE HS

This menu items allows you to de-register a handset. Proceed as follows:

Enter your four-digits PIN code (default 0000) and press the Menu/OK button [15] to
confirm.

Enter the number of the handset that you want to de-register (1 to 5).

Press the Menu/OK button [15] to confirm your entry.

A confirmation beep will sound and the "DELETED" message will appear for a few
seconds on the display [17].

Instead of the name of the handset, the de-registered handset display [2] will show
"NOT REGISTER".

RESET

You can reset the base. All settings will be completely erased. Proceed as follows to reset the base:

After confirming by pressing the Menu/OK button [15] the message "RESET?" appears
on the display [17].

Press the Menu/OK button [15] again, the message "PIN-" appears on the display [17].

Enter your PIN code (default 0000) and press the Menu/OK button [15] to confirm. Or
press the ESC button [14] to cancel.

After the base has been reset, a confirmation beep will sound and the "COMPLETED"
message will appear for a few seconds on the display [17].
Please note that a reset erases all saved information (redial, phonebook, calls list and
speed dial numbers) from the base.
SilverCrest SGKT 50 A1
English - 161