Cleaning The Blower Housing; Fuel System Maintenance; Replacing The Fuel Filter - Toro MB TX 2500 Operator's Manual

Installing the Spark Plug
Figure 28
Cleaning the Blower
Housing
Every 100 hours/Yearly (whichever comes first)
To ensure proper cooling, ensure that the grass
screen, cooling fins, and other external surfaces of the
engine are kept clean at all times.
Ensure that the cooling shrouds are installed.
Important:
Operating the engine with a blocked
grass screen, dirty or plugged cooling fins, and/or
cooling shrouds removed causes engine damage
due to overheating.
Fuel System
Maintenance

Replacing the Fuel Filter

Service Interval: Every 100 hours/Yearly (whichever
1. Park the machine on a level surface, move
the motion-control levers to the N
position, engage the parking brake, and lower
the hopper.
2. Shut off the engine, and remove the key. Allow
the engine to cool.
3. Replace the fuel filter as shown in
g028109
23
comes first) (more often under
dusty, dirty conditions).
EUTRAL
Figure
Figure 29
-
LOCK
29.
g185888
g027753