Switching The Notebook On For The First Time; Switching On The Notebook - Siemens FUJITSU AMILO Li Series Getting Started

Switching the notebook on for the first time
Switchingon for thefirsttime
When you switch your notebook on for the first time, the supplied software is
installed and configured. Due to the fact that this installation procedure must not
be interrupted, you should set aside enough time for it to be fully completed and
connect the notebook to the mains outlet using the mains adapter.
During installation, the notebook must only be rebooted when you are requested to do so!
Your operating system is pre-installed on the hard disk to facilitate the procedure
when you use your notebook for the first time.
► Switch the notebook on (see
► During installation, follow the on-screen instructions.
Consult the operating system manual if anything is unclear about the requested input data.
If a Windows operating system is installed on your notebook, you will find
additional information on the system as well as the drivers, help programs,
updates, manuals, etc. on your notebook or on the "Drivers & Utilities" CD/DVD
or on our website (see

Switching on the Notebook

2
The power-on indicator is lit.
10600900852, edition 1
"Switching on the Notebook", Page
"Information sources", Page
1
1
Preparation for use and operation
7).
3).
► Slide the release button in the direction
of the arrow (1) and unfold the LCD
screen upward (2).
Notebook:
► Press the ON/OFF switch (1) to switch
the notebook on.
English - 7