Setting The Ring Delay - Brother 2850 Owner's Manual

To Select or Change Your Receive Mode
1
Press Receive Mode. The screen displays your
current selection.
2
Press the key again and the next selection appears.
After 2 seconds, the screen returns to the date and time
display, along with your new Receive Mode setting.
If you are changing the Receive Mode while in another operation, the screen
returns to that operation.

Setting the Ring Delay

The Ring Delay setting determines the number of times the machine rings before it answers in FAX
ONLY or FAX/TEL mode. (See Operation from an External or Extension Telephone, page 38 and
For Fax/Tel Mode Only, page 38.)
1
Press Menu/Set, 2, 1, 1.
2
Press or
for Australia, 01-10 for New Zealand, 00 -10 for some countries.).
3
Press Menu/Set when the screen displays your selection.
4
Press Stop/Exit.
Setting the F/T (Fax/Tel) Ring Time (Fax/Tel Mode Only)
You need to determine how long the machine will notify you with its special F/T pseudo-ring when
you have a voice call. This ringing happens after the initial ringing from the phone company. Only
the machine rings, for 20, 30, 40 or 70 seconds (for 20, 30, 40 or 55 seconds: Only for New Zealand) ;
no other phones on the same line ring the special F/T pseudo-ring. However, you can answer the call
on any extension phone (in a separate wall socket) on the same line as the machine. (See Operation
from an External or Extension Telephone, page 38.)
1
Press Menu/Set, 2, 1, 2.
2
Press or
call, and then press Menu/Set.
3
Press Stop/Exit.
21
Chapter 3
09/06 15:25
Current Receive Mode
to select how many times the line rings before the machine answers (02-10
to select how long the machine will ring to alert you that you have a voice
TAD:ANSWER MACH.
FAX:FAX ONLY
F/T:FAX/TEL
FAX
TAD:EXTERNAL ANSWERING MACHINE
MAN:MANUAL
FAX ONLY
FAX/TEL
MANUAL