4 Cleaning and maintenance
Note: Switch off the appliance and unplug it from the power outlet before continuing.
Cleaning the body of the appliance
Use a soft, dry cloth to clean the appliance surface, including air inlet and
outlet.
Clean particle sensor surface. Do not open particle sensor cover.
Cleaning the filter surface
Clean the filter surface with a vacuum cleaner or brush every two weeks.
1
2
1
Pull the back cover and remove it from the appliance.
2
Pull the filter from the appliance.
3
Clean the surface of the filter with a vacuum cleaner.
4
Put the filter back into the appliance.
5
Reattach the back cover.
6
Wash your hands thoroughly after cleaning the filter.
Filter replacement
When the filter replacement alert lights up
Note:
• The filter is not washable or reusable.
• Do not smell the filter because it contains air pollutants.
Replace the filter when
1
Replace the filter with Philips filter (FYM220/30). Follow the
instructions in the chapter "Installing the filter".
2
Press
to switch on the appliance.
EN
8
3
lights up on the screen.
4
5
6