Advertisement
TECHNICAL BULLETIN
FA-A-0326-C
Setting an image capture mode
The following shows the procedure for setting an image capture mode. Set it with a personal computer and network camera
connected after setting an IP address.
A resolution that can be set in a camera recorder module or GOT is determined according to the setting of "Image capture
mode."
If a resolution to be set does not appear in the communication test screen of a camera recorder module, change this setting.
Operating procedure
1.
Enter the IP address of a network camera on a web browser.
2.
Enter the set user name and password to log in to the network camera.
The live page appears.
3.
Click the [Setup] button.
4.
Select [Image/Audio] [Image], and select a mode including a resolution to be set in a camera recorder module for
[Image capture mode].
5.
Click the [Set] button.
The change is applied.
REVISIONS
Version
Print Date
A
February 2021
B
April 2021
C
July 2021
TRADEMARKS
AXIS and AXIS COMMUNICATIONS are either trademarks or registered trademarks of AXIS AB in various jurisdictions.
ONVIF is a trademark of Onvif, Inc.
The company names, system names and product names mentioned in this bulletin are either registered trademarks or
trademarks of their respective companies.
In some cases, trademark symbols such as '
Revision
First edition
Models of ONVIF supported network cameras have been added.
The title has been changed.
The overall configuration has been reviewed with this change.
Models of ONVIF supported network cameras manufactured by CANON INC. and Panasonic i-PRO Sensing
Solutions Co., Ltd. have been added.
' or '
' are not specified in this bulletin.
[
9 / 9
]
Advertisement
