After Use - Frigidaire ECTJ1600S User Manual

b)If you want the juice to run straight into a glass, press the
spout downwards to open it and place a stand under it.
3. Cut a citrus fruit in half and press the cut end of one fruit half
onto the cone. The juicer switches on automatically when you
press the fruit down and the cone starts to turn. The juicer
automatically switches off as soon as you reduce pressure on
the cone. The cone scrapes the pulp out and squeezes the
juice from the fruit. The juice flows through the strainer into the
juice container from where it can run into a glass (the spout
must be open). The strainer keeps back thick pulp and seeds.
4. To maximize the quantity of juice extracted from a fruit, press
a fruit onto the cone several times.
5. The juicer includes one speed control only. Suggested
operation time: For one time juicing, after juicing for 15 to 30
seconds, please let the juicer rest for 2 mins. For continuous
juicing, after juicing for 15 to 30 seconds, please stop for 20
seconds, then repeat above operation for 10 times, then
please let the juicer rest for 25 mins at least.

After use

1. Remove cone, strainer, juice container and drive shaft from
the appliance and clean them.
2. Unplug the appliance.
7