Assembly And Adjustments - DeWalt DCT410 Instruction Manual

waterproof up to the camera connector. DO nOT UsE the
handle set under wet conditions.
The inspection camera is a professional tool. DO nOT let
children come into contact with the tool. Supervision is
required when inexperienced operators use this tool.
Control Buttons (Fig. A, D)
Fig. D
21 13 14 15 16
12
10
Power button for the screen
button turns on the screen only. The camera
cable needs to be turned on using the camera
cable on/off switch
Zoom/Delete button
two functions:
• Zoom: This is to be used when you need a
closer look at the object (3x zoom).
• Delete: When in the folder menu, pictures
can be deleted by using this button.
Play : Press the button to go to the folder
14
where photos and videos are saved.
OR
Press the button to play videos.
Record : Press this button to start and stop
15
recording a video.
Camera : Press this button for taking
16
a photo.
Main Menu 17 : Press this button to show
a list of options for operating the inspection
camera or to exit a screen.
Back Arrow 18 : Press this button to
navigate backward.
OK : Press this button to save changes.
19
Forward Arrow
navigate forward.
27
20
19
18
17
: This
12
8 (Fig. A).
13 : The button has
: Press this button to
20
handle Power indicator
light is on it indicates that the handle set is on.
Reset button 27

ASSEMBLY AND ADJUSTMENTS


WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories. An
accidental start-up can cause injury.
Screen (Fig. E)
When the screen is attached to the handle set with a battery
installed, the screen will receive a charge from the battery.
Ensure the screen is fully charged before use.
When the screen is disengaged from the handle set, a
battery icon appears in the upper left corner. This icon also
displays the current charge of the screen.
To install the screen 7 into the handle set
screen with the rails on the handle set and slide it firmly into
the handle until you hear the lock snap into place.
To remove the screen from the handle set, firmly slide the
screen up from the tool handle.
The screen can be turned on and viewed when it is not
attached to the handle set, allowing easier maneuverability
of the camera.
Fig. E
Camera Cable (Fig. F)
Align the camera cable with the camera connector
in and turn the connector counterclockwise (camera screen
facing you) to firmly attach.
Fig. F
6
To remove the camera cable, turn the connector clockwise
(direction of arrow).
English
21 : When the green
9 , align the
7
9
. Push
6
7