Bosch Security Systems | 10 June 2004 10. Power Sources - Operate the unit only from the type of power source indicated on the label. If unsure of the type of power supply to use, contact your dealer or local power company.
ON. Le débranchement du cordon d'alimentation permet de couper l'alimentation des appareils. Bosch Security Systems | 10 June 2004 Sicherheitshinweise VORSICHT: UM EINEN ELEKTRISCHEN SCHLAG ZU VERMEIDEN, IST DIE ABDECKUNG (ODER RÜCKSEITE) NICHT ZU ENTFERNEN.
Page 5
ON-OFF si trova nella posizione ON. Il cavo di alimentazione costituisce il dispositivo di scollegamento dell'alimentazione principale per tutte le unità. Bosch Security Systems | 10 June 2004 Medidas de Segurança CUIDADO: PARA REDUZIR O RISCO DE CHOQUE ELÉCTRICO, NÃO RETIRE A TAMPA (OU A PARTE...
LTC 2917/91 monitor in a 19in. standard EIA rack. LTC 9119/00 Rack Kit: For mounting one LTC 2919/90 monitor in a 19in. standard EIA rack. Bosch Security Systems | 10 June 2004 SERVICE If the unit ever needs repair service, the customer should contact the nearest Bosch Security Systems, Inc.
Video NOTE: All video inputs are passive loop-through. Bosch Security Systems | 10 June 2004 Connecting Y/C (S-video) Signal to the Monitor There are two (2) mini-DIN type connectors (Figure 1, Item 10);...
(#7): Press this switch to turn the monitor ON (the indicator will illuminate). Press the switch again to turn the monitor OFF. Bosch Security Systems | 10 June 2004 On-screen Display (OSD) Menu Press [OSD] (Figure 1, Item 1) to obtain the following...
Page 12
Volume: Adjusts the volume level for the audio inputs. See the OSD Volume menu configuration below. Bosch Security Systems | 10 June 2004 Under Scan: Selects the underscan display size. The Under Scan option reduces the picture size so that the entire image is displayed on the screen.
(i.e., the number or video inputs connected). If a video input is added after power-up, that signal will NOT be displayed in sequence mode Bosch Security Systems | 10 June 2004 Resolution Insert the power plug firmly into the socket (1) Select and push correct video input button;...
Page 15
EN | 15 LTC 2915/91, LTC 2917/91, & LTC 2919/90 | Instruction Manual | Bosch Security Systems | 10 June 2004...