14
en | Installing the Monitor
6.2
Mounting the Monitor
The UML-151-90, UML-171-90, and the UML-191-90 are designed for use on a desktop or
mounted to a wall or rack.
6.2.1
Desktop Installation
The Bosch General Purpose monitors are delivered with a 3-pole US-style power cord and a 3-
pole Euro-style power cord. Use the US-style power cord where 120 VAC, 60 Hz power is
available; use the Euro-style power cord where 230 VAC, 50 Hz power is available. The
monitor automatically adjusts to either power input voltage.
6.2.2
Wall Mount Installation
The square mounting holes (100 mm [3.9 in.] centers) are compatible with the Bosch UMM-
LW-20B fixed wall mount or the UMM-LW-30B swivel/tilt. To install the wall mount, do the
following:
1.
F.01U.127.338 | 2.0 | 2009.05
Remove the base from the LCD panel section by unscrewing the four (4) holding screws
before separating the base from the panel.
Figure 6.1 Removing the Base
User's Manual
General Purpose LCD Monitors
Bosch Security Systems, Inc.