Download Print this page

Ordering Information - Bosch FlexiDomeXF VDC-485V09-20 Specifications

Vdc‑485 series dome cameras flexidome xf

Advertisement

4 | VDC‑485 Series Dome Cameras FlexiDome XF
Sensitivity (3200 K)
VDC-485V09
Color
Color + 10 x
SensUp
NightSense
NightSense+
10 x SensUp
SensUp
Automatic continuous up to 10 x, off selecta-
ble
Horizontal resolution
540 TVL
Signal-to-noise ratio
>50 dB
AGC
Auto, maximum level selectable 28 dB
Auto black
On/off selectable
Electronic shutter
Flickerless, on/off, default shutter
NightSense (XF only)
Auto, forced, off selectable
Day/Night (DN only)
Auto, monochrome, color selectable
Dynamic range
32 x dynamic range enhancement
Dynamic noise reduction Automatic, off, selectable
Sharpness correction
Horizontal and vertical, symmetrical
Backlight compensation
Off, programmable window and level selecta-
ble
White balance
Automatic sensing (2500 to 9000 K), AWB
hold and manual
Video motion detector
Four (4) areas, sensitivity selectable
Camera ID
16-character editable string, position selecta-
ble
Video output
Composite video 1.0 Vpp, 75 ohm
Remote control
Bi-directional coaxial communication
Synchronization
Internal or LineLock*
Connector
Flying leads (through the back)
* LineLock (only when AC-powered) synchronizes the camera
to the power line zero crossing for roll-free vertical interval
switching. Vertical phase delay can be adjusted (from 0° to
358°) to allow vertical synchronization in multi-phase power
installations.
Optical
Varifocal
Manual zoom and focus adjustment
Iris control
Automatic iris control
Viewing angle
3 to 9.5 mm
Wide 95º x 69º (H x V)
Tele 30.2º x 22.6º (H x V)
3.7 to 12 mm
Wide 76.1º x 55.8º (H x V)
Tele 23.8º x 17.9º (H x V )
9 to 22 mm
Wide: 31.2º x 22.8º (H x V)
Tele: 12.8º x 9.6º (H x V )
0.28 lx
0.62 lx
2.48 lx
(0.027 fc)
(0.058 fc)
(0.23 fc)
0.028 lx
0.062 lx
0.248 lx
(0.0027 fc)
(0.0058)
(0.023 fc)
0.099 lx
0.23 lx
0.88 lx
(0.0092 fc)
(0.021)
(0.081)
0.0099 lx
0.023 lx
0.088 lx
(0.00092)
(0.0021)
(0.0081)
Mechanical
Dimensions
See drawings
Weight
740 g (1.63 lb)
Mounting
Flush on hollow surface with three (3) screws
in a 4S electrical box
Color
White (RAL9010) trim ring with black inner
liner
Adjustment range
360º pan, 90º tilt, ±90º azimuth
Dome bubble
Polycarbonate, clear with UV blocking anti-
scratch coating
Trim ring
Aluminum
Environmental
Operating temperature
-50 ºC to +50 ºC (-58 ºF to +122 ºF) (with
heater 'ON')
Storage temperature
-40 ºC to +70 ºC (-40 ºF to +158 ºF)
Humidity
5% to 93% relative humidity
Impact protection
IEC 60068-2-75 test Eh, 50 J
EN 50102, exceeding IK 10

Ordering Information

VDC‑485V03‑10 Vandal Resistant Color
Model
1/3-inch, PAL color, 540 TVL, 12 VDC/24
VAC, 50 Hz, w/3-9.5 mm F1.0 Varifocal lens,
white
VDC‑485V03‑10S Vandal Resistant Color
Model, Surface Mount
1/3-inch, PAL color, 540 TVL, 12 VDC/24
VAC, 50 Hz, w/3-9.5 mm F1.0 Varifocal lens,
white, surface mount
VDC‑485V03‑20 Vandal Resistant Color
Model
1/3-inch, NTSC color, 540 TVL, 12 VDC/24
VAC, 60 Hz, w/3-9.5 mm F1.0 Varifocal lens,
white
VDC‑485V03‑20S Vandal Resistant Color
Model, Surface Mount
1/3-inch, NTSC color, 540 TVL, 12 VDC/24
VAC, 60 Hz, w/3-9.5 mm F1.0 Varifocal lens,
white, surface mount
VDC‑485V04‑10 Vandal Resistant Color
Model
1/3-inch, PAL color, 540 TVL, 12 VDC/24
VAC, 50 Hz, w/3.7-12 mm F1.4 Varifocal
lens, white
VDC‑485V04‑10S Vandal Resistant Color
Model, Surface Mount
1/3-inch, PAL color, 540 TVL, 12 VDC/24
VAC, 50 Hz, w/3.7-12 mm F1.4 Varifocal
lens, white, surface mount
VDC-485V03-10
VDC-485V03-10S
VDC-485V03-20
VDC-485V03-20S
VDC-485V04-10
VDC-485V04-10S

Advertisement

loading

This manual is also suitable for:

Vdc-485v09-20sFlexidomexf vdc-485v03-10Flexidomexf vdc-485v03-20Flexidomexf vdc-485v04-10Flexidomexf vdc-485v04-20Flexidomexf vdc-485v09-10