Keyboard Commands By Number - Bosch VEZ-221-ECCE Installation Manual

AutoDome Easy II IP
Aux Control Tab
The Aux Control tab is used to enter pre-programmed keyboard
control commands. See Section 15 Keyboard Commands by
Number, page 122, for a list of all commands. To access the Aux
Control tab, navigate to the Livepage and click the Aux Control
tab (see Figure 11.2 below).
NOTICE!
The Aux Control tab can also be used to display the OSD
menus. Once the OSD menus are displayed, the virtual joystick
in the View Control tab can be used to navigate the menus, and
the Focus and Iris buttons can be used to make menu
selections.
Figure 11.2 Aux Control Tab
1
2
3
4
5
6
7
8
Bosch Security Systems, Inc.
Command number field
Keypad (numbers 0-9)
Show a preset shot
Set a preset shot
Initiates a command
Deletes a number in the Command Number field
Used to select a menu item
Stops a command
Installation Manual
Using the AutoDome Easy II IP | en
F.01U.164.576 | 2.0 | 2010.03
83