Dishes; Childproof Lock; Basic Settings - Siemens CD634GA.0B User Manual And Installation Instructions

Table of Contents

Advertisement

10  Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
10.1 Activating and deactivating the

childproof lock

You can activate and deactivate the childproof lock re-
gardless of whether the appliance is switched on or off.
Press and hold
for approx. 4 seconds to activate
1.
the childproof lock.
11  Basic settings
You can configure the appliance to meet your needs.
11.1 Overview of the basic settings
Here you can find an overview of the basic settings
and factory settings. The basic settings depend on the
features of your appliance.
Notes
¡ Changes to the language, button tone and display
brightness settings take effect immediately. All other
settings do not take effect until you save them.
¡ Following a lengthy power failure, the settings that
you will need to configure before you can use the
appliance again will appear on the display. You will
need to set the language, time and date again.
Setting
Language
Time
Date
Water hardness
Audible signal
Button tone
Display brightness
Clock display
Lighting
Selection
Other languages available
Set the current time
Set the current date
0 (softened)
1 (soft)
2 (moderately hard)
3 (hard)
4 (very hard)
Short (30 s)
Medium (1 min)
Long (5 min)
Switched off (the button
tone for the
 button
remains active even when
the button tones are de-
activated)
Switched on
Can be adjusted to one of
five different levels
Digital
Off
Switched on during oper-
ation
Switched off during oper-
ation
a A confirmation notification will appear on the dis-
play.
a The control panel is now locked. The appliance can
only be switched off using the
a When the appliance is on,
pliance is off,
will not be lit.
Press and hold
for approx. 4 seconds to deactiv-
2.
ate the childproof lock.
a A confirmation notification will appear on the dis-
play.
Setting
Operating mode on start-
up
Night-time dimming
Brand logo
Fan run-on time
Factory settings
11.2 Changing settings
Requirement: The appliance must be switched off.
Press
⁠ .
1.
Press
⁠ .
2.
Use the rotary selector to select "Settings".
3.
Press ⁠ .
4.
Use the rotary selector to change the values.
5.
6.
Use the  button to go through the settings, and
make changes as required using the rotary selector.
Press the
 button to save your changes.
7.
8.
Use the
or  button to select "Save".
Discarding changes to the basic settings
Use the
or  button to select "Discard".
a All your changes will be discarded and not saved.
11.3 Changing the time
You can change the time by going to the basic set-
tings.
Press
⁠ .
1.
Press
⁠ .
2.
Use the rotary selector to select "Settings".
3.
Press the  button until "Time" appears.
4.
Use the rotary selector to change the time.
5.
Press
⁠ .
6.
Childproof lock en
 button.
will be lit. When the ap-
Selection
Steam
Main menu

Dishes

Off
On
Note: When night-time
dimming is switched on,
the display is dimmed
between 22:00 and
05:59.
Display
Do not display
Recommended
Minimum
Restore
Do not restore
15

Advertisement

Table of Contents
loading

Table of Contents