Sealey AP24212 Instructions For Use

thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer to
instruction
manual
1. saFetY
warning! Ensure Health & Safety, local authority and general workshop practice regulations are adhered to when using this product.
‰
do not open more than one drawer at a time.
8
do not step on the drawers.
8
do not let children near the tool chest.
8
do not use in damp areas.
8
ensure drawers are fully closed and the self locking catch is activated before moving the tool chest.
9
Keep the work area clean and ensure there is adequate lighting.
9
warning! the warnings, cautions and referred to in this instruction manual cannot cover all possible conditions and situations that may
‰
occur. it must be understood that common sense and caution are factors that can not be built into this product, but must be applied by the
operator.
2. introduction
Heavy gauge steel with double wall construction for extra strength and durability. Ball bearing drawer runners provide superior performance and
carry heavier loads. Each drawer fitted with catch to prevent unexpected opening, when being transported around the workshop. Added security
provided by side mounted cylinder locks, supplied with two keys. recessed handles permit units to be slotted in work environments where space
is tight. Rust and solvent resistant powder coat paint finish. Fitted with anti-shock protection on all four corners to prevent accidental damage.
tough composite top allows these units to be used as a workstation.
3. sPeciFication
model no.
dimensions
overall size
drawers Qty
medium drawer
large drawer
X-Large Drawer
Medium 1/2 Drawer
Large 1/2 Drawer
X-Large 1/2 Drawer
aP24212
© Jack sealey limited
instructions for
mobile workstation 12/16 drawer with
ball bearing runners
model no's:
aP24212
(w x d x h)
1130 x 565 x 1000
Qty
3 533 x 391 x 58 6
2 533 x 391 x 128 2
1 533 x 391 x 195
3 268 x 391 x 58 6
2 268 x 391 x 128 2
1 533 x 391 x 195
Original Language Version
aP24212 & aP24216
aP24216 optional accessories
(w x d x h) model no.
1130 x 565 x 1000 AP24ACC2
AP24ACC3
533 x 391 x 58 AP24ACC4
533 x 391 x 128 AP24ACC5
AP24ACC6
268 x 391 x 58 AP24ACC7
AP24ACC9
268 x 391 x 128
AP24ACC10
aP24216
description
side shelf with Paper roll Holder
document Holder
Waste Bin
can and Bottle Holder
Drawer Divider 3 x 395 x 58mm
Drawer Divider 3 x 395 x 120mm
Short Hook Set x 10pcs
Medium Hook Set x 10pcs
AP24212, AP24216| Issue:3 (L) 15/06/17