6
The search will display a list of found Brother Wireless Devices.
Select the device you wish to configure and click Next.
The Default Node name of the NC-2200w is "BRN_xxxxxx"
(where "xxxxxx" is the last six digits of Ethernet address.)
7
If your network supports DHCP/BOOTP/RARP, choose Obtain
an IP address automatically and the NC-2200w will
automatically obtain IP address information from your network.
If you want to manually enter the IP address settings of the NC-
2200w, choose Set static IP address and enter the necessary
IP address settings for your network.
After making your selection, click Next and the Wizard will
search for available wireless networks.
2 - 16 NC-2200W WIRELESS SETTING