Logo; Change Code; Programme Selection; Controls - Miele PDR 914 Operating And Installation Instructions

Supervisor level
- lb

Logo

You can choose whether the "Miele Professional" logo or your own logo appears in the
display.

Controls

For the setting
Laundrette basic ext. time
- Miele Professional logo
- Customer logo

Change code

You can alter the access code to the Supervisor level.
Enter the current code.

Enter a new code.


Programme selection

Controls
You can select whether the tumble dryer is operated as a "launderette" machine. Short-
cuts are the easiest way to operate the machine. Operating staff are unable to change
pre-set programmes.
Tip: Start by configuring all necessary settings and changes to the tumble dryer before ad-
justing any of the options below.
Caution: When activating any of these options, the Supervisor level will no longer be
available.
You will no longer be able to access the Supervisor level via the display. Please follow
the instructions below if you wish to change any other settings.
Opening the Supervisor level (launderette version)
Switch the tumble dryer on and open the dryer door.

Touch the Start/Stop sensor and hold it down whilst carrying out steps -.

Close the dryer door.

Wait until the Start/Stop sensor, which will now be flashing quickly, lights up con-

stantly ...
... and then release the Start/Stop sensor.

- Standard
Factory default: all (selected) programmes are available.
- Launderette, basic (4 prog)
4 programmes are available.
Under Favourite programmes, you can set which 4 programmes to select/modify.
- Launderette ext. (12 prog)
42
Launderette ext. (12 prog)
, the option
must be selected.
Launderette basic int. time
, or