Setup Overview; Cable Management - Lenovo ThinkSmart Hub Deployment Manual

ThinkSmart Hub Hardware Deployment Guide for all UC Platforms

Setup Overview

1.
Unpack device and components; place on a flat surface
2.
Attach connectors on red side of ThinkSmart One Cable to ports on base of Hub
3.
Connect Peripherals and Display(s) cables from peripheral to Block end of One Cable
4.
Connect Power cable from Block end to AC Adapter
5.
Power on
6.
Configure Hub
7.
Mount security box with Blocks of One Cable, if desired

Cable Management

The ThinkSmart Hub delivers a custom single cable management solution designed to cleanly run the
cables off the tabletop while keeping all connections secure. Once connected, the back of the device will
consist of the One Cable and the HDMI ingest cable (HDMI Ingest cable not included).
6