Download Print this page
Philips 915B403001 Replacing
Philips 915B403001 Replacing

Philips 915B403001 Replacing

Replacing lamp on mitsubishi dlp tv series c9, 737, 837

Advertisement

Quick Links

SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
Replacing Philips 915B403001 lamp on Mitsubishi DLP TV series C9, 737, 837
Mitsubishi WD-82837 DLP TV
Step-by-Step Instructions for replacing the
Mitsubishi 915B403001 Lamp
When the picture on your Mitsubishi starts to dim it's time to replace the lamp. The Lamp
Indicator will also turn red. You'll need to purchase a
Mitsubishi 915B403001
lamp
replacement.
If you have a Mitsubishi series WD-60C9 /WD-65C9 /WD-73C9 / WD-60737 / WD-65737 /
WD-73737 / WD-82737 / WD-65837 / WD-73837 / WD-82837 the Lamp Indicator will be
found on the front panel just left of the Power button.
When the TV is operating normally, this indicator
will not be lit. When it turns RED, the
Mitsubishi
915B403001
has reached its end of life and must
be replaced immediately; the TV will not operate
with a burnt out lamp since this is the TV's only
light source.
The life of the
Mitsubishi 915B403001
lamp can vary depending on the selected lamp mode
and how much the TV is used. The original lamp is guaranteed from one year from the date
of original purchase.
Before Installation
Be sure to purchase a genuine
Mitsubishi 915B403001
Lamp Cartridge (this includes the
housing as well as the bulb) either directly from the manufacturer or from an authorized
dealer. Cheaper models may damage your set since these are often created with
counterfeit, inferior parts that will not fit or perform properly. Your warranty may also be
void if you install a lamp bought from an unauthorized source.

Advertisement

loading

Summary of Contents for Philips 915B403001

  • Page 1 SALE on Projector Bulbs at www.BulbAmerica.com take additional 5% Off with coupon code 5PDF Replacing Philips 915B403001 lamp on Mitsubishi DLP TV series C9, 737, 837 Mitsubishi WD-82837 DLP TV Step-by-Step Instructions for replacing the Mitsubishi 915B403001 Lamp When the picture on your Mitsubishi starts to dim it’s time to replace the lamp. The Lamp Indicator will also turn red.
  • Page 2 Don’t touch the lamp glass with bare hands as the oil from your fingers may cause premature lamp failure. PART ONE: Removing the Old Mitsubishi 915B403001 Lamp Cartridge ...
  • Page 3 SALE on Projector Bulbs at www.BulbAmerica.com take additional 5% Off with coupon code 5PDF PART TWO: Installing the New 915B403001 Lamp  Using the lamp handle, carefully remove the new Mitsubishi 915B403001 Lamp cartridge from the bag. DON’T TOUCH the glass parts of the lamp.
  • Page 4 Using this mode makes the TV hotter and the fan may turn on more frequently. You may also notice more noise on the TV. Mitsubishi TVs Compatible with the Mitsubishi 915B403001 Lamp C9 Series: WD-60C9, WD-65C9, WD-73C9 737 Series: WD-60737, WD-65737, WD-73737, WD-82737...