Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE
PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL
INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! Ensure Health & Safety, local authority and general workshop practice regulations are adhered to when using this
equipment.
Read instructions thoroughly to ensure safe and effective use. Important! Read instructions in conjunction with vehicle or
equipment manufacturer's workshop manual.
Maintain the apparatus in good condition (use an authorised service agent). Before each use check condition of each component. If any
component is damaged, replace immediately. Use genuine parts only. Unauthorised parts may not function correctly and will invalidate
the warranty.
Use in a suitable work area. Keep area free from unrelated materials and ensure that there is adequate lighting.
WARNING! Always wear approved eye (or face) and hand protection when pressure leakage testing.
Keep children and unauthorised persons away from the working area.
DO NOT operate the leakage tester when you are tired or under the influence of alcohol, drugs or intoxicating medication.
DO NOT clean the equipment with solvents or other harsh chemicals.
DO NOT use the leakage tester for any purpose other than that for which it is designed.
When not in use return parts to the case, and store it in a safe, dry, childproof location.
2. INTRODUCTION
Designed to charge the turbo/intercooler system with a low pressure of regulated workshop air to show the presence of leaks
within the system. Kit supplied with three pairs of stepped adaptors to fit most sizes of hose found on commercial vehicles. Features a pressure
gauge, shut off valve and pressure relief valve. Supplied in storage case.
3. SPECIFICATION
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CV2030
Adaptor Sizes: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105-110mm, 115-120mm, 125-130mm
4. CONTENTS
No:
Part No:
1
CV2030.01
2
CV2030.02
3
CV2030.03
4
CV2030.04
5
CV2030.05
6
CV2030.06
7
CV2030.07
© Jack Sealey Limited
INSTRUCTIONS FOR:
TURBO SYSTEM LEAKAGE TESTER - HGV
MODEL N
Description
105/110mm Adaptor Air Coupling
105/110mm Adaptor Blank End
115/120mm Adaptor Air Coupling
115/120mm Adaptor Blank End
125/130mm Adaptor Air Coupling
125/130mm Adaptor Blank End
Pressure Regulator
CV2030
o
:
Original Language Version
CV2030
Issue: 1 - 15/08/14
Advertisement
