Toshiba B-852 Series Supply Loading Instructions page 6

4. Release the locking levers on the two paper guides as shown in the figure below.
5. Grasp the right hand Paper Guide and move it to the right to open the Paper Guides wide enough to accept the
media.
6. Feed the media between the two guides.
7. Feed the paper under the Upper Sensor Ass'y and pull the paper until it extends past the Platen. (until it
extends past the cutter outlet when the optional cutter is attached.)
8. Grasp the right Paper Guide and move it to the left to close both Paper Guides and automatically center the
media.
9. Press the Paper Guide Locking Levers to lock the Paper Guides in place.
Paper Guide
Paper Guide Locking Lever
10. After loading the media, don't forget to move the Supply Holder Unit to the forward notch of the Supply
Roll Frame as shown below.
Lock
Free
Platen
6
Paper Guide
Upper Sensor Ass'y