Advertisement
6 Disassembly and Assembly Instructions
For assembly, refer to the Assembly Instructions, and perform the procedures in the opposite order of disassembly.
6.1.
Rubber Cap, Connector U (lower)
1. Turn the locking knob counterclockwise to remove it.
2. Put a bladed screwdriver into each of the two holes at the
grinder bottom. Push down the housing cover claws to
detach the cover.
3. Lay the grinder with its left side down.
4. Remove the five pan head tapping screws and detach the
A.C. motor housing (left).
6.2.
Disconnecting the power cord and switch
1. Lift the A.C. motor and disconnect the lead wire terminal.
2. Pull and disconnect the power cord terminal out of the switch.
3. Disconnect the lead wire terminal from the switch.
4. Remove the two switch lock screws and take out the switch.
8
Advertisement
