Product Description; Use; System Prerequisites; Scope Of Delivery - Bosch KTS 340 Original Instructions Manual

en 22 | KTS 340 | Product description
3.

Product description

3.1

Use

The KTS 340 is a system tester for control unit diag-
nosis, trouble-shooting, repair and service in auto-
motive workshops. The functions of the KTS 340 with
licensed ESI[tronic] are as follows:
R
Vehicle information
R
Diagnosis
R
Trouble-shooting
R
Servicing
!
The KTS 340 is a precision device, which is not to
be subjected to sources of heat (e.g. direct sunlight),
impact, vibration, magnetic fields and excessive soil-
ing. The KTS 340 may only be opened for changing
the battery (the battery referred to in this manual is
a rechargeable battery).
3.2

System prerequisites

A PC/laptop with Win XP (SP2), Win VistaTM Home
Premium, Win VistaTM Business or Win 7 (32-Bit/64-
Bit) operating system and at least one free USB port
is required for KTS 340 licensing using the ESI[tronic]
Startcenter and the software update for KTS 340 con-
trol unit diagnosis.
The USB port must support the USB 2.0 or USB 1.1
protocol.
i
ESI[tronic] must be activated by the ESI[tronic] soft-
ware license key.
|
1 689 989 038 2013-08-16
3.3

Scope of delivery

Description
KTS 340
Power supply unit
Power supply lead
USB connecting cable, 3 m
OBD diagnostic cable, 3 m
UNI connecting cable, 4 core
Stylus (3x)
USB adapter
ESI[tronic] Startcenter DVD
Case
Measuring lead, red
Measuring lead, blue
Measuring lead, yellow
Ground cable, black
Test prod, red (2x)
Connection terminal, black
Important information and safety instructions
KTS 340 operating instructions
EU Declaration of Conformity
!
Only use the UNI connecting cable (1 684 463 539)
for measurements with less than 30 V.
!
Use measuring leads for measurements smaller than
60 VDC, 30 VAC or 42 VACpeak only.
The accessories must only be used in circuits
which are not connected to a mains voltage
supply (measuring category 0 according to
EN 61010-2-030:2010). The enclosed accesso-
ries must only be used with Bosch products,
and at voltages below the voltage value as
imprinted on the accessories. When combin-
ing accessories, it must be ensured that the
lowest voltage value imprinted on the acces-
sories is not exceeded.
!
Always store the KTS 340 and accessories in the
case when not in use.
3.4

Special accessories

Information on special accessories, such as vehicle-
specific connecting cables, can be obtained from your
authorized Bosch dealer.
Order number
1 687 023 601
1 684 461 106
1 684 465 562
1 684 465 557
1 684 463 539
1 683 083 007
1 681 335 117
1 987 P12 010
1 685 438 626
1 684 430 065
1 684 430 066
1 684 430 067
1 684 430 068
1 684 485 035
1 684 480 022
1 689 979 922
1 689 989 038
1 689 974 307
Robert Bosch GmbH