Scan To Image - Brother MFC-3220C Software Manual

Scan to Image

When you select Scan to Image your original will be scanned and
sent directly to the PC you designated on your network. The Brother
SmartUI will activate the default graphics application on the
designated PC. You can change the
®
Windows 98/Me/2000: See Scan to Image on page 3-14.) (For
®
Windows XP: See Hardware Section: Changing the Scan to button
configuration on page 4-5 to 4-10.)
For Network Scanning the Brother Control Center (SmartUI)
selections are used only for configuring the Scan button. You
will not be able to initiate a network scan from the Brother
Control Center (SmartUI).
1
Load your original.
2
Press
3
Press
to Image .
Menu/Set
Press
4
Press
to.
Menu/Set
Press
If the LCD prompts you to enter a PIN Number, enter the 4-digit
PIN Number for the destination PC on the control panel.
Black Start
Press
The machine will start the scanning process.
NETWORK SCANNING (MFC-3320CN AND MFC-3820CN ONLY) 8 - 7
Scan
( ).
or to select Scan
.
or to select the destination PC you want to send
.
Color Start
or
Scan
configuration. (For
Scan to Image
.