Sealey AP5210T Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you
years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE
PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
1.1. GENERAL SAFETY
 WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this Topchest &
Rollcab combination.
 Locate the Topchest & Rollcab combination in a suitable working area.
 Use the Rollcab on level and solid ground, preferably concrete.
 Keep the work area clean, uncluttered and ensure that there is adequate lighting.
 Keep the Topchest & Rollcab combination clean and tidy in accordance with good workshop practice.
 Keep children and unauthorised persons away from the working area.
 DO NOT use the Topchest & Rollcab combination for any purpose other than that for which it is designed.
 DO NOT move the Topchest & Rollcab combination with drawers open. To avoid tipping, open one drawer at a time and close and secure all
drawers whilst moving.
 DO NOT overload or step on the drawers.
 DO NOT place the Topchest & Rollcab combination in a damp or wet location or an area where there is condensation.
 DO NOT clean the Topchest & Rollcab combination with any solvents which may damage the surfaces or the protective coating.
 WARNING! The warnings, cautions and instructions referred to in these instructions cannot cover all possible conditions and situations that may
occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must be applied by the operator.
2. INTRODUCTION
• Designed to take our modular tool trays.
• All heavy gauged steel construction and manufactured with steel inner walls for extra strength and durability.
• Heavy-duty 45mm ball bearing drawer runners provide superior performance and carry heavier loads.
• Full height rear locking mechanism, locks full-length drawers in multiple locations.
• Added security provided by tumbler locks, supplied with two folding keys.
• Rust and solvent resistant powder coat paint finish.
• The rollcab is fitted with four Ø125mm rubber wheels, two castors with large toe locks and two fixed wheels.
• Topchest features heavy-duty side handles.
• Rollcab features a high, polished chrome handle for comfort and control when manoeuvring.
• Rollcab supplied with a 10mm thick top mat to protect top surface from scratching.
• Drawers feature stylish aluminium drawer pulls and non-slip liners.
3. SPECIFICATIONS
Model No:
Overall Size (WxDxH):
Medium Drawer:
Large Drawer:
Full Width Large Drawer:
AP5210T / AP5210TB
© Jack Sealey Limited
INSTRUCTIONS FOR:
10 DRAWER TOPCHEST/13 DRAWER ROLLCAB
WITH BALL BEARING RUNNERS
MODEL No's:
AP5210T & AP5210TB
1264 x 435 x 492mm
(x10) 533 x 398 x 60mm
-
-
Original Language Version
AP5210T/AP5210TB/AP5213T/AP5213TB
AP5213T & AP5213TB
1290 x 463 x 991mm
(x10) 533 x 398 x 60mm
(x2) 533 x 398 x 165mm
(x1) 1140 x 398 x 120mm
AP5213T / AP5213TB
AP5210T, AP5210TB
Issue No.1 - 15/08/14
AP5213T, AP5213TB