Sealey PTB141007 Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE
PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
1.1. GENERAL SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this rollcab

and topchest.
Locate the rollcab and topchest in a suitable work area.

Keep the work area clean, uncluttered and ensure there is adequate lighting.

WARNING! Use the rollcab and topchest on level and solid ground, preferably concrete.

Keep rollcab and topchest clean and tidy in accordance with good workshop practice.

Keep children and unauthorised persons away from the work area.

DO NOT use this rollcab and topchest for any purpose other than that for which it is designed.

DO NOT place the rollcab and topchest in a damp or wet location or an area where there is condensation.

DO NOT clean the rollcab and topchest with any solvents which may damage the surfaces or the protective coating.

DO NOT move the rollcab and topchest with the drawers out. To avoid tipping, open one drawer at a time and close and secure all

drawers whilst moving.
DO NOT step on the drawers.

2. INTRODUCTION
• Heavy-duty welded steel construction for strength and durability.
• Textured powder coat finish which is solvent and rust resistant.
• Ball bearing drawer runners provide superior performance and carry heavier loads, double sets on large drawers.
• All drawers have full width sand blasted aluminium lift latch drawer pulls, making easy access while preventing inadvertent opening when box
is being moved.
• Heavy-duty Ø125mm Mag style castors, 4 swivel with toe brakes and 2 fixed on rollcabs.
• Heavy-duty exterior handles on chest and cabinets.
• Non-slip drawer liners supplied for all drawers.
• Topchests feature gas struts on lids for easy opening.
• Rollcabs (except for stainless steel versions) supplied with 12mm PVC coated MDF worktop (25mm on PTB183015) for use as a workbench
when not used with a topchest.
• Integral locking system locks all drawers in each unit with the turn of a key.
• All supplied with 2 keys.
• Manufactured to the highest levels of construction to withstand the toughest of workshop/garage conditions.
3. SPECIFICATION
Model No:. . . . . . . . . . . . . . . PTB183015 . . . . . . . . . . . . . .PTB181510 . . . . . . . . . . . . PTB142511 . . . . . . . . . . . . . . . . . . . . . . PTB141007
All dimensions in mm
Type: . . . . . . . . . . . . . . . . . . . Rollcab 15 Drawer . . . . . . . . .Topchest 10 drawer . . . . . . Rollcab 11 Drawer. . . . . . . . . . . . Topchest 7 Drawer
Overall Size (W x D x H): . . . 1845 x 510 x 1125 . . . . . . . . .1830 x 500 x 565 . . . . . . . . 1425 x 510 x 1050 . . . . . . . . . . . . 1410 x 500 x 565
Medium 1/2 Drawer: . . . . . . . x2 395 x 425 x 58 . . . . . . . . . .x2 395 x 425 x 58 . . . . . . . . x3 410 x 425 x 58 . . . . . . . . . . . . .x2 415 x 425 x 58
Medium Drawer: . . . . . . . . . . x1 820 x 425 x 58 . . . . . . . . . .x3 825 x 425 x 58 . . . . . . . . x3 840 x 425 x 58 . . . . . . . . . . . . x3 845 x 425 x 58
Medium Drawer: . . . . . . . . . . x2 1280 x 425 x 58 . . . . . . . . .N/A . . . . . . . . . . . . . . . . . . . N/A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
Large 1/2 Drawer: . . . . . . . . . x4 395 x 425 x 135 . . . . . . . . .x4 395 x 425 x 135 . . . . . . . x1 410 x 425 x 135 . . . . . . . . . . . . . . . . . . . . . . . N/A
Large Drawer: . . . . . . . . . . . . x1 1280 x 425 x 135 . . . . . . . .x1 825 x 425 x 135 . . . . . . . N/A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
Large Drawer: . . . . . . . . . . . . x3 820 x 425 x 135 . . . . . . . . .N/A . . . . . . . . . . . . . . . . . . . x1 840 x 425 x 135 . . . . . . . . . . .x1 845 x 425 x 135
X Large 1/2 Drawer: . . . . . . . x2 395 x 425 x 285 . . . . . . . . .N/A . . . . . . . . . . . . . . . . . . . x1 410 x 425 x 210 . . . . . . . . . . .x1 415 x 425 x 210
X Large Drawer: . . . . . . . . . . N/A . . . . . . . . . . . . . . . . . . . . .N/A . . . . . . . . . . . . . . . . . . . x1 840 x 425 x 210 . . . . . . . . . . . . . . . . . . . . . . . N/A
Full Width Drawer:. . . . . . . . . N/A . . . . . . . . . . . . . . . . . . . . .N/A . . . . . . . . . . . . . . . . . . . x1 1310 x 425 x 130 . . . . . . . . . . . . . . . . . . . . . . N/A
© Jack Sealey Limited
INSTRUCTIONS FOR:
TOPCHEST 7 DRAWER, 10 DRAWER
ROLLCAB 11 DRAWER, 15 DRAWER
PTB141007, PTB181510, PTB142511
MODEL NO'S:
PTB183015
Original Language Version
PTB141007,PTB181510,PTB142511,PTB183015 Issue: 1 - 22/10/14