Sharp DR-P320 User Manual page 15

Solution
• Please check that the USB cable is connected
securely.
• Please check the power source switch on the
back of the radio is set to the active power
supply (Battery/DC). If using batteries, please
also check a new set (or recharge them if
they are rechargeable batteries).
No Sound (There is no sound or the
sound is distorted.)
Reason
• The volume is set to the minimum level.
Solution
• Turn up the volume.
The buttons on the unit do not work.
Reason
• Unit is being used near to a source of static
electricity.
Solution
• Switch off and unplug the unit.
• Then connect the plug to the power supply
and switch it on again.
Poor signal reception
Reason
• Stations are being lost or reception is
interment.
Solution
• Extend the aerial to its fullest extent,
• Change the position of the radio.
• Move the radio to another location.
EN