Error message
RESOLUTION ADAPTED
(The printer has printed
the document at a reduced
resolution.)
TONER EMPTY
TONER LOW
FUSER MALFUNCTION
LASER BD
MALFUNCTION
SCANNER MALFUNCTION
D-RAM ERROR
NV-RAM ERROR
MAIN MOTOR ERROR
ENGINE INTERFACE
ERROR
Action
•
Reduce the complexity of your document before you print to
prevent automatic reduction of the resolution.
(For HL-1440, HL-1450 and HL-1470N Users)
•
Expand the printer memory by adding a commercially available
SIMM memory. See
4.
•
See
"Replacing the Toner Cartridge"
•
Purchase a new toner cartridge and have it ready for when the
Toner Empty status is indicated.
•
Turn the power switch off, wait a few seconds and then turn it
on again.
•
Leave the printer for 10 minutes with the power on. If the error
occurs again, consult your dealer.
•
Turn the power switch off, wait a few seconds and then turn it
on again. If the error occurs again, consult your dealer.
6-3
CHAPTER 6 TROUBLESHOOTING
"Installing Additional Memory"
in Chapter 5.
in Chapter