Download Print this page

Brother HL-1260 User Manual page 96

Brother hl-1260: users manual
Hide thumbs Also See for HL-1260:

Advertisement

Display Message
RESOLUTION=600
RESOLUTION=300
Select the print resolution in this mode according to the resolution required
for your print jobs as shown below:
Resolution Setting in Resolution Mode
Print Jobs
300 dpi
300 dpi
For optimum print quality For mixing 300 dpi bitmaps
600 dpi
Not recommended
Note
Even if you set the resolution to 600 dpi in this mode, the printer may not be
able to print large files at 600 dpi because of insufficient memory. However,
it automatically decreases the resolution to 300 dpi to print them. While the
printer is printing, the display prompts "01 PR300 ... ."
If the printer cannot print files even at 300 dpi, the "MEMORY FULL"
error occurs. See
"TROUBLESHOOTING" in Chapter
This automatic resolution decrease function works in the BR-Script 2 mode
and other emulation modes with the page protection on. See also
PROTECTION" in this chapter.
When you want to print without decreasing the resolution, you must expand
the memory capacity of the printer to 6-Mbytes or more.
Expand the memory capacity referring to the table below. It shows the
minimum size of memory required in the BR-Script 2 mode.
Paper Size
Letter or A4
Legal
(Duplex printing)
For memory expansion, see "RAM EXPANSION" in Chapter 5 or consult
the dealer where you purchased the printer.
Resolution
Set the resolution to 600 dpi. (Factory
setting)
Set the resolution to 300 dpi.
600 dpi
with 600 dpi
For optimum print quality
300 dpi
600 dpi
4 Mbytes
6 Mbytes
4 Mbytes
6 Mbytes
4 Mbytes
10 Mbytes
CHAPTER 4 CONTROL PANEL
7.
"PAGE
4–29

Advertisement

loading

This manual is also suitable for:

Hl-1260eHl-1660Hl-1660n1660e - b/w laser printer