Mac Os X - Brother HL-4150CDN Quick Setup Manual

You can download the latest drivers and utilities for your machine from the
Brother Solutions Center at http://solutions.brother.com/.
Windows
®
For
6
Before you install For USB Interface Cable Users
a.
Turn off the machine and make sure the
Make sure that your computer is ON and
USB interface cable is NOT connected to the
you are logged on with Administrator
machine, and then begin installing the printer
rights.
driver. If you have already connected the cable,
disconnect it.
IMPORTANT
• If there are any programs running, close
them.
• The screens may differ depending on
your operating system.
6
For Wired
Note
• For Windows Vista ® and Windows ® 7 Network
users, when the User Account Control
screen appears, click Allow or Yes. Interface Cable
• If you want to install the PS driver
Users
(BR‑Script3 printer driver), choose
Custom Install and then follow the
on‑screen instructions.
Note
• Depending on your security settings, a
Windows Security or antivirus software If you are going to connect the
window may appear when using the
machine to your network, we
machine or its software. Please allow or recommend that you contact
permit the window to continue. your system administrator prior to
• XML Paper Specification Printer Driver installation.
The XML Paper Specification Printer
Driver is the most suitable driver when
printing from the applications that use
the XML Paper Specification documents.
Please download the latest driver by
accessing the Brother Solutions Center at
http://solutions.brother.com/.

Mac OS X

For
6
Before you install For USB Interface Cable Users
a.
Connect the USB cable to the USB connector marked with a
Make sure your machine is connected
symbol, and then connect the cable to your Macintosh.
to the power and your Macintosh is ON.
b.
You must be logged on with Administrator
Make sure the machine power switch
rights. is on.
IMPORTANT
For Mac OS X 10.4.10 users, upgrade
to Mac OS X 10.4.11 – 10.6.x. (For
6
the latest drivers and information
For Wired Network Interface Cable Users
on the Mac OS X you are using, visit
http://solutions.brother.com/.)
a.
Remove the
Note
protective cap from
If you want to setup the PS driver
the LAN connector.
(BR‑Script3 printer driver), please
go to the Brother Solutions Center at
http://solutions.brother.com/ and click
Downloads on your model page to download
the driver and visit FAQ's for installation
instructions.
Color Correction (if needed)
Color Calibration
The output density for each color may vary depending on the environment
the machine is in, such as temperature and humidity. Calibration helps you to
improve the color density.
Note
• If you print using the Direct Print feature or the BR‑Script printer driver, you need
to perform the calibration from the control panel. See Using the control panel.
• If you print using the Windows ® printer driver, the driver will get the calibration data
automatically if both Use Calibration Data and Get Device Data Automatically
are on. See Advanced tab in the User's Guide.
• If you print using the Macintosh printer driver, you need to perform the calibration
using Status Monitor. After turning Status Monitor on, choose Color Calibration
from Control menu. See Color Calibration in the User's Guide.
Install the printer driver
b.
Put the installation Note
CD‑ROM into your
If the Brother screen does not appear
automatically, go to My Computer
CD‑ROM drive. If
(Computer), double‑click the
prompted, select your
CD‑ROM icon, and then double‑click
model and language.
start.exe.
For Peer-to-Peer network users
a.
Remove the protective
cap from the LAN
connector.
TCP/IP TCP/IP
Router
a
Machine
b
For shared network users
Install the printer driver
a.
Put the installation CD‑ROM into your CD‑ROM
TCP/IP drive. If prompted, select your model and language.
If the Brother screen does not appear automatically, go to
Client computer
a
My Computer (Computer), double‑click the CD‑ROM icon,
Also known as "Server" or "Print server"
b and then double‑click start.exe.
TCP/IP or USB
c
Machine
d
Install the printer driver
c.
Put the installation CD‑ROM
into your CD‑ROM drive.
b.
Install the printer driver
Connect the network interface cable to
the LAN connector marked with a
d.
Put the installation CD‑ROM
symbol and then connect it to a free
into your CD‑ROM drive.
port on your hub.
c.
Make sure the machine power switch
is on.
Using the control panel
a.
You can reset the calibration parameters back to those set
Press + or − to choose Color Correction.
Press OK. at the factory.
b. a.
Press + or − to choose ColorCalibration. Press + or − to choose Color Correction.
Press OK.
Press OK.
b.
c.
Press + or − to choose ColorCalibration.
Press OK to choose Calibrate.
Press OK.
d.
Press + to choose Yes.
c.
Press + or − to choose Reset.
Press OK.
d.
Press + to choose Reset.
c.
Click Install Printer Driver, and click Yes if
you accept the license agreement.
b. Install the printer driver
Connect the network interface cable
to the LAN connector marked with a
d.
Put the installation CD‑ROM into your CD‑ROM
symbol and then connect it to a
drive. If prompted, select your model and
free port on your hub.
language.
c.
Make sure the machine power switch
Note
is on.
If the Brother screen does not appear automatically,
go to My Computer (Computer), double‑click the
CD‑ROM icon, and then double‑click start.exe.
b.
Click Install Printer Driver, and click Yes if
you accept the license agreement.
Note
d.
Double‑click the Start Here OSX icon. Follow the on‑screen
instructions.
Note
It may take a few minutes for installation to
complete.
e. f.
Double‑click the Start Here OSX icon. Follow Follow the on‑screen instructions until this screen appears. Choose your machine from
the on‑screen instructions. the list, and then click OK.
Note Note
It may take a few minutes • If there is more than one of the same model connected on your
for installation to complete. network, the MAC Address (Ethernet Address) will be displayed
after the model name.
• You can find your machine's MAC Address (Ethernet Address)
and IP Address by printing out the Printer Settings Page. See
Print the Printer Settings Page below.
Color Registration
Auto Registration
You can adjust the print position of each color automatically.
a.
Press + or − to choose Color Correction.
Press OK.
b.
Press + or − to choose Auto Regist..
Press OK.
c.
Press OK to choose Registration.
d.
Press + to choose Yes.
To adjust the print position of each color manually, see Manual Registration in the
User's Guide.
d. e.
Follow the on‑screen instructions until Connect the USB cable to the USB connector
this screen appears. marked with the symbol, and then
connect the cable to the computer.
e. f.
Click Install Printer Driver, Follow the on‑screen instructions to
and click Yes if you accept the complete setup.
license agreement.
Note
You can find your machine's IP Address
and the node name by printing out the
Printer Settings Page. See Print the
Printer Settings Page below.
c.
Follow the on‑screen instructions until this screen appears. Choose
your machine's queue, and then click OK.
Note
Contact your administrator if you do
not know the location or the name of
the machine queue on the network.
e. f.
Follow the on‑screen instructions until this screen Click Next.
appears. Choose your
machine from the list, and
then click OK.
g.
Click Next.
Note
When the Brother Support screen
appears, make your selection and
follow the on‑screen instructions.
Print the Printer Settings
Page
The Printer Settings Page lists all the current
printer settings, including network settings.
a.
Press + or − to choose Machine Info..
Press OK.
b.
Press OK to choose Print Settings.
Note
For Network Users
If the IP Address on the Printer Settings Page
shows 0.0.0.0, wait for one minute and try again.
f.
Turn the machine
Finish
on, and follow
the on‑screen
instructions to The installation is
complete setup. now complete.
The installation is
Finish
now complete.
Note
If you use a specified IP Address for
the machine, you must set the Boot
Method to Static by using the control
panel. For more information, see
Network menu in the Network User's
Guide.
d.
Follow the
Finish
on‑screen
instructions to
complete setup. The installation is
now complete.
Finish
Note
When the Brother Support screen
appears, make your selection and
The installation is
follow the on‑screen instructions.
now complete.
The installation is
Finish
now complete.
Note
If you use a specified IP Address for
the machine, you must set the Boot
Method to Static by using the control
panel. For more information, see
Network menu in the Network User's
Guide.
Brother CreativeCenter
Icon
Get inspired. Double‑click the Brother
CreativeCenter icon on your desktop
to access a FREE web site with many
ideas and resources for personal and
professional use.
http://www.brother.com/creativecenter/