For Parallel Interface Cable Users (For Hl-5040/5050 Users Only); Connecting The Printer To Your Pc And Installing The Driver - Brother HL-5040 Quick Setup Manual

Step 2

For Parallel Interface Cable Users (For HL-5040/5050 Users Only)

Connecting the Printer to Your PC and Installing the Driver

1
Click Connect the interface cable &
Install the driver/utility from the Initial
Setup menu.
2
Select the Parallel interface.
3
Turn off the printer power switch.
4
Connect the parallel interface cable to your
PC, and then connect it to your printer.
14
Installing the Driver
5
Turn on the printer power switch.
If the Found New Hardware Wizard
appears on your PC, click the Cancel
button.
6
Click the Next button when the movie
finishes.